IP64 waterproof, Sensored brushless motor for 1/10 Short Course Truck/Truggy/Monster
What is the box?
- (1) Ezrun 3665 SD G3 Motor
-
(1) User's manual
-
(1) A HOBBYWING decal
Features:
- The EzRun 3665 SD G3 features an improved water- proof sensored cable interface and an upgraded sensored mode to achieve motor temperature protection and perfectly matches the EzRun MAX10 G2 ESC.
- The high-precision Hall sensor components ensures that the rotor position output is always accurate and consistent, achieving excellent linearity and great throttle control.
- The EzRun 3665 G3 motor adopts a high-precision bearing that is waterproof in the front end of the motor. The rear end of the motor uses precision iron cover with a smaller structure to improve the capacity, and at the same time, provides a higher bearing speed while keeping resistance low. The operation is smoother and more reliable.
- Compared to the G2 motor, the motor temperature is greatly reduced under the same load conditions. The overall efficiency is 3% more effective while the maximum output power has increased by 5%
- All the materials used on the EZRUN 3665 G3 motor (Motor casing, bearings, ultra-thin silicon steel sheets, high temperature-resistance copper wire, explosion-proof rotor, high-tolerance alloy shaft) are carefully selected and approved by our in-house engineers. Hobbywing is serious in providing users with an extraordinary performance for a long period of time.
- The motor adopts a modular detachable structure design for easy disassembly and daily maintenance. This helps to prolong the lifespan of the motor and maintain- ing the efficiency of the motor simple.
- The IP-67 waterproof system guarantees excellent waterproofing and dustproofing protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit.
EZRUN 3665 SD Brushless G3 Motor
Ezrun Series |
3665 SD G3 |
3665 SD G3
|
3665 SD G3
|
KV |
2400 |
3200 |
4000 |
P/n |
30402604 |
30402607 |
30402608 |
LiPo |
2-4S |
2-3S |
2-3S
|
R. (Ω) |
0.00816Ω |
0.00555Ω |
0.00495Ω
|
No-load Current |
5.2A
|
7.1A |
8.2A |
Pole |
4 |
4 |
4 |
Weight (g) |
304.5g |
304.4g |
297.2g |
- Bearing size: Front: D16*D5*T5 / Rear: D11*D5*T5
- Motor diameter & Length (mm): φ=37mm/ L=65.8mm
- Shaft Diameter & Length (mm): φ=5mm / L=16.5mm